Use
•
Diaper bag
•
Backpack
7.2.7.3 Required accessories
A belt set is required to secure the rehab buggy for use as a seat in a vehicle for transporting persons with reduced
mobility.
•
The lashing points are integrated in the base frame:
–
Lashing points, front: see fig. 60, item 1
–
Lashing points, rear: see fig. 61, item 1
•
The belt set can be obtained from a third-party manufacturer. Further information about suppliers can be found
in the document "Using your product for transportation in a wheelchair accessible vehicle", order number
646D158.
60
7.2.7.4 Adjusting the seating unit
Before using the product in a vehicle for transporting persons with reduced mobility, the seating unit must be
adjusted in the driving direction (so the user faces forward in the direction of travel).
Kimba Neo seating unit: To remove/rotate and mount the seating unit, see the instructions for use (user), art
•
icle number 647G892.
Mygo seating system/alternative seating systems: To remove/rotate and mount the seating unit, see the
•
separate instructions for use of the seating system.
7.2.7.5 Adjusting and securing the seat angle
7.2.7.5.1 Kimba Neo seating unit
Activating the locking mechanism
Before the product can be used in a vehicle for transporting persons with reduced mobility, the seat angle must be
adjusted horizontally and secured.
1) Turn the top knob to the right and adjust the seat bottom so it is horizontal (Adjusting the seat angle).
2) Pull out the locking pin, rotate it to the left and reinsert it (see fig. 62, item 1).
→ The locking pin is now engaged (see fig. 63).
3) Tilt the seat adapter (see fig. 63, item 2) against the locking pin.
→ The seat adapter must contact the locking pin without play.
34 | Ottobock
61
Kimba Neo, Kimba Cross, Kimba Inline