Anti-Tipper; Storage Bag; Spoke Protector - Otto Bock Kimba Neo Instructions For Use Manual

Use
3) Insert the splash guard into the receiving holes (see fig. 92).
4) Insert and lock the rear wheels.
91

7.3.8.3 Anti-tipper

The anti-tipper prevents the mobility base from tipping too far backward.
1) Loosen the screw connection of the right rear axle and remove the nut and lock washers.
2) Put on the anti-tipper so that the fork of the anti-tipper engages with the crossbrace (see fig. 93).
3) Guide the bore hole of the anti-tipper over the rear axle and reinstall the nut with the lock washers.
4) Tighten the nut. Optional: By pressing down and then turning, swing the anti-tipper from the active to the
passive position (see fig. 94 and see fig. 95).
93
95

7.3.8.4 Storage bag

1) Attach the side of the storage bag with 3 snap fasteners to the lateral frame tube.
2) Attach the side with 2 snap fasteners to the right and left of the base frame.

7.3.8.5 Spoke protector

► Attach the spoke protector to the spokes with mounting elements.
44 | Ottobock
92
94
Kimba Neo, Kimba Cross, Kimba Inline