Retrofitting The Respirator Platform (Kimba Neo Only) - Otto Bock Kimba Neo Instructions For Use Manual

Preparation for use

6.2 Retrofitting the respirator platform (Kimba Neo only)

WARNING
Improper use in vehicles for transporting persons with reduced mobility
Severe accidental injuries caused by use with untested product combinations
► Use of the product in vehicles for transporting persons with reduced mobility in combination with the artificial
respiration platform option is not permitted.
INFORMATION
The respirator platform cannot be installed on a product with fixed front wheels.
The respirator platform can be installed as follows:
• Installation of the large T1 respirator platform over the front wheels (see fig. 15) – the user sits in the seat
facing away from the direction of travel
• Installation of the large T1 respirator platform over the rear wheels (see fig. 16) – the user sits in the seat facing
in the direction of travel
The respirator is attached to the respirator platform using straps through the slots.
Using an anti-slip mat is recommended.
The seating unit can only be turned around if the respirator platform is moved.
15
Respirator platform mounting kit overview
17
20 | Ottobock
16
Kimba Neo, Kimba Cross, Kimba Inline