Push Bar; Adjusting The Push Bar - Otto Bock Kimba Neo Instructions For Use Manual

Use
2) Twist the knob on the upper front part of the frame in the direction indicated by the arrow to release the adjust­
ment mechanism (see fig. 36, item 2).
NOTICE! Damage to the seat adjustment. Turn the knob with normal manual force only to the stop
(until you feel a clear resistance). Excessive turning of the knob could damage the adjustment mech­
anism.
3) Set the seat angle to the desired position (see fig. 37).
4) Let go of the knob and the adjustment mechanism will lock automatically.
5) Press the backrest gently to the front/back to make sure that the seat angle is securely set. If this is not the
case, the position of the knob must be checked.
36

7.2.2 Push bar

CAUTION
Improper lifting by attendants
Tipping over, falling of the user due to lifting on removable components
► Attendants may lift the buggy only by welded or permanently attached components. It is particularly danger­
ous to lift the buggy by the footrest, push bar, lap bar, or armrests.

7.2.2.1 Adjusting the push bar

The push bar can be adjusted to the desired height:
1) Press both buttons on the setting joints on both sides simultaneously (see fig. 39, item 1).
2) Move the push bar to the desired position (see fig. 39, item 2).
3) Release the buttons.
4) Move the push bar up or down slightly until the joints click audibly into place.
38
26 | Ottobock
37
39
Kimba Neo, Kimba Cross, Kimba Inline