Coupling The Trailer To The Bicycle; Bicycle Trailer Accessory Package; Reflectors; Rear Light - Otto Bock Kimba Neo Instructions For Use Manual

Use
7) Insert the rubber stopple.
INFORMATION: First tighten the adjustment nut of the quick-release mechanism until the quick-
release clamping lever can be closed firmly.
8) Screw the adjustment nut of the quick-release mechanism onto the clamp axle by at least 5 turns.
INFORMATION: Observe the instructions for use of your bicycle and/or quick-release mechanism.
85

7.3.7.2 Coupling the trailer to the bicycle

The instructions for connecting the trailer to the bicycle are written on a sticker which is attached to each draw-bar.
The trailer draw-bar will additionally be secured to the bicycle frame with a safety strap.

7.3.7.3 Bicycle trailer accessory package

7.3.7.3.1 Reflectors

1) Attach the two red reflectors respectively to the rear cross-tube with the tube clamps (see fig. 86, item 1) (as an
alternative to a second red reflector, a combination of rear light plus reflector may be included).
2) Attach the two white reflectors at the front of the Kimba Cross to the splash guard using adhesive tape.
86

7.3.7.3.2 Rear light

► Attach the battery-powered rear light, also at the rear cross-tube using one or more tube clamps (see fig. 86,
item 1) (as an alternative to a second red reflector, a combination of rear light plus reflector may be included).

7.3.7.3.3 Rollover bar

1) Attach the rollover bar on the push bar (see fig. 87).
2) Insert and tighten the Allen head screws (see fig. 87).
42 | Ottobock Kimba Neo, Kimba Cross, Kimba Inline