Storage; Preparation For Use; Assembly; Kimba Neo - Otto Bock Kimba Neo Instructions For Use Manual

Hide thumbs Also See for Kimba Neo:
Table of Contents

Advertisement

5.2 Storage

The outdoor mobility base must be stored in a dry place. An ambient temperature between -10° C and +40° C must
be maintained.
Tyres contain chemical substances that can react with other chemical substances (such as cleaning agents,
acids, etc.).
Direct exposure to sunlight or UV radiation causes the tyres to age more quickly. As a result, the tread surface
hardens and corner pieces break out of the tread.
Avoid unnecessary parking outdoors. The tyres should be replaced every 2 years regardless of wear and tear.

6 Preparation for use

6.1 Assembly

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding out the backrest, only grip by the specified components.
CAUTION
Improper assembly
Falling, tipping over of the user due to components coming off
► After each assembly, verify the proper fit of the removable wheels. The quick-release axles must be firmly
locked in the wheel attachment.
► Before using the product, the folding mechanism must be firmly locked in place.
► When attaching the seating unit, make sure you hear it engage into the outdoor mobility base.
► Secure the seating unit using the seat lock.

6.1.1 Kimba Neo

CAUTION
Non-activated tilt-limiting mechanism
Falling out of the user due to user error
► Before rotating a Kimba Neo seating unit, always adjust the tilt-limiting mechanism.
Attaching the rear wheels
1) If wheel locks are engaged: disengage wheel locks.
2) Depress the locks on the wheels (see fig. 5, item 1).
3) Push the rear wheels onto the axle until the lock clicks into place audibly.
Attaching the front wheels (only possible for the fixed front wheels)
1) Depress the locks on the wheels (see fig. 6, item 1).
2) Push the front wheels onto the axle until the lock clicks into place audibly.
Unfolding the rehab buggy (when the seating unit is detached)
1) Unfold the push bar (see fig. 7, item 1). To unfold the push bar: see Page 26.
2) Fold out the rehab buggy by pulling the push bar (see fig. 7, item 2; see fig. 8).
→ The release handles of the folding mechanism click into place automatically after folding out (see fig. 7, item 3).
Kimba Neo, Kimba Cross, Kimba Inline
Preparation for use
Ottobock | 17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kimba crossKimba inline

Table of Contents