Disassembly And Transport; Folding The Chassis - Otto Bock Kimba Neo Instructions For Use Manual

7.3.9 Disassembly and transport

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding out the backrest, only grip by the specified components.
NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
► Never place heavy objects on the folded product.
INFORMATION
The product can be equipped with the Kimba Neo seating unit or alternative seating systems. In this case, please
observe the information in the separate instructions for use for the seating system.

7.3.9.1 Folding the chassis

1) Pull the quick-release axles and the wheels together out of the axle retainer.
2) Remove the quick-release axles from the rear wheels.
3) Open the eccentric lever of the front wheel.
4) Remove the front wheel with the splash guard from the fork.
5) Release the clip (see fig. 96).
6) Pull the locking pin out of the hole in the back brace and the lugs.
7) Slide the back brace out of the adapter and fold down the push bar (see fig. 97).
8) Insert the locking pin into the frame lugs (see fig. 98).
9) Insert the transport locks.
96
98
Kimba Neo, Kimba Cross, Kimba Inline
97
Use
Ottobock | 45