Engaging The Wheel Lock; Adjusting The Wheel Lock; Adjusting The Seat Angle - Otto Bock Kimba Neo Instructions For Use Manual

Use
NOTICE
Incorrect use of the wheel lock
Damage to wheels, loss of braking function due to incorrect operation
► Do not use the wheel lock whilst travelling. The product must be standing still before braking.
► Do not engage the wheel lock forcefully.
► When you activate the wheel lock and feel clear resistance, you can move the wheels slightly forwards or
backwards to change their positions so that the lock pin latches on to the brake ring.

7.3.4.1 Engaging the wheel lock

1) Pull the wheel lock levers to apply the drum brakes (see fig. 80, item 1).
2) By simultaneously moving the small wheel lock levers down, lock the wheel locks (see fig. 80 item 2).
3) Activate the wheel lock levers again to release the wheel locks (see fig. 80 item 1).
80

7.3.4.2 Adjusting the wheel lock

1) Loosen the counter nut (see fig. 81, item 1)
2) Turn the adjustment nut (see fig. 81, item 2)
3) Tighten the counter nut (see fig. 81, item 1).
81

7.3.5 Adjusting the seat angle

1) Loosen and open the knob on the left side of the chassis up to the stop (see fig. 82).
2) Push down on the spring-loaded knob so that the seat can be moved freely around the axle of the seat adapter.
3) Select the desired seat position.
4) Release the knob and wiggle the seat back and forth slightly to engage it.
5) Tighten the knob (see fig. 82).
40 | Ottobock Kimba Neo, Kimba Cross, Kimba Inline