87
7.3.7.3.4 Pennant
1) Loosen the left-hand cap nut of the push bar bearing (see fig. 88 item 1).
2) Insert the fork of the fibreglass rod behind the washer (see fig. 88, item 2).
3) Tighten the left-hand cap nut of the push bar bearing (see fig. 88 item 1).
88
7.3.8 Additional options
7.3.8.1 Swivelling front wheel
The swivelling front wheel reduces the turning radius of the rehab buggy, making it easier to use in confined
spaces.
1) Remove the fixed front wheel with the splash guard (see Page 38, Installing the front wheel).
2) Insert the swivelling front wheel into the fork and push it to the rear and up (see fig. 89, item 1).
3) Close the eccentric lever of the quick-release axle (see fig. 90).
89
7.3.8.2 Splash guard for rear wheels/clothing protectors
1) Press the central bolts of the quick-release axles and remove the rear wheels.
2) Insert the splash guard adapter and screw it in place (see fig. 91, item 1).
Kimba Neo, Kimba Cross, Kimba Inline
90
Use
Ottobock | 43