Show Openvpn Site-To-Site Status; Related Commands - Brocade Communications Systems 5600 Reference Manual

show openvpn site-to-site status

show openvpn site-to-site status

Displays information on OpenVPN connections in site-to-site mode.
Syntax
show openvpn site-to-site status
Modes Operational mode
Usage Guidelines Use this command to display information on all connected sites. This command is only available on a
site-to-site-mode endpoint.
Examples The following example shows the output of this command.
vyatta@vyatta:~$ show openvpn site-to-site status
OpenVPN client status on vtun1 [openvpn with psk]
Remote CN
--------------- --------------- --------------- ------- ------- ----------------------
None (PSK)
OpenVPN client status on vtun0 [openvpn with tls]
Remote CN
--------------- --------------- --------------- ------- ------- ----------------------
N/A

Related commands

Commands for using other system features with OpenVPN interfaces are described in the following
guides:
Related Commands Documented Elsewhere
Bridging
Firewall
OSPF
Policy Based Routing
QoS
RIP
RIPng
120
Remote IP Tunnel IP
192.168.74.160 192.168.2.2
Remote IP Tunnel IP
192.168.74.160 192.168.1.2
Commands for configuring bridge groups on OpenVPN interfaces are described in
Brocade 5600 vRouter Bridging Reference Guide.
Commands for configuring firewall on OpenVPN interfaces are described in Brocade
5600 vRouter Firewall Reference Guide.
Commands for configuring the Open Shortest Path First routing protocol on OpenVPN
interfaces are described in Brocade 5600 vRouter OSPF Reference Guide.
Commands for configuring Policy Based Routing on OpenVPN interfaces are
described in Brocade 5600 vRouter Policy-based Routing Reference Guide.
Commands for configuring quality of service on OpenVPN interfaces are described in
Brocade 5600 vRouter QoS Reference Guide.
Commands for configuring the Routing Information Protocol on OpenVPN interfaces
are described in Brocade 5600 vRouter RIP Reference Guide.
Commands for configuring RIPng on OpenVPN interfaces are described in Brocade
5600 vRouter RIPng Reference Guide.
TX byte RX byte Connected Since
8.9K 8.8K N/A
TX byte RX byte Connected Since
17.5K 15.1K N/A
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03