Brocade Communications Systems 5600 Reference Manual page 50

Brocade SSL-VPN Client Bundler
The username and password are either your cooperative credentials are provided to you by your IT
administrator.
FIGURE 14 Connection confirmation pop-up message
After the Brocade SSL-VPN client is connected, it can be controlled through the tray menu by right-
clicking on the tray icon.
FIGURE 15 Brocade SSL-VPN client tray menu
To quit the Brocade SSL-VPN client, use the tray menu and select Exit. After confirming the exit, the
SSL-VPN connection terminates.
To connect again to the SSL-VPN endpoint or to start the Brocade SSL-VPN client after rebooting,
either use the Connect SSL-VPN to shortcut on the desktop or navigate the following path in the
Windows Start menu:
Start > All Programs > Brocade SSL-VPN Client
NOTE
The installation wizard installs the Brocade SSL-VPN client persistently on your computer. So, the
SSL-VPN client can be used across reboots and needs to be downloaded only once. Your IT
administrator might ask you to obtain the latest version of the Brocade SSL-VPN client when changes
are made to the SSL-VPN network configuration or maintenance updates are made to the Brocade
SSL-VPN client software.
To uninstall the Brocade SSL-VPN client, go to the Windows Control Panel and select Uninstall/
Change.
50 Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03