interfaces openvpn <vtunx> server push-route <ipv4net>
interfaces openvpn <vtunx> server push-route <ipv4net>
Specifies a route to be pushed to all clients in a client-server environment.
Syntax
set interfaces openvpn vtunx server push-route ipv4net
delete interfaces openvpn vtunx server push-route
show interfaces openvpn vtunx server push-route
Parameters
vtunx
ipv4net
Modes
Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines
Use this command to specify a subnet that all clients can access by routing packets through the server.
This route is pushed to all clients and the OpenVPN process is restarted.
Use the set form of this command to specify a route to be pushed to all clients.
Use the delete form of this command to remove the route configuration.
Use the show form of this command to view the route configuration.
100
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
Multi-node. The subnet to be made accessible to the OpenVPN clients through
the OpenVPN server.
You can define multiple subnets to push to clients by creating multiple push-
route configuration nodes. Each must have a unique IPv4net address.
openvpn vtunx {
server {
push-route ipv4net
}
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03