Reset Openvpn Interface <Vtunx - Brocade Communications Systems 5600 Reference Manual

reset openvpn interface <vtunx>
reset openvpn interface <vtunx>
Resets all tunnel connections on an OpenVPN interface.
Syntax
reset openvpn interface vtunx
Parameters vtunx
Modes Operational mode
Usage Guidelines
Use this command to reset all tunnel connections on an OpenVPN interface. In a site-to-site
environment, the connection will be re-established after it is reset. This is also the case on the client
side in a client-server environment. On the server side, in a client-server environment, all connections
are dropped. The server will then wait for the clients to re-establish the connections.
NOTE
The OpenVPN process does not get restarted by this command, though all tunnel connections are
reset.
112
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03