Interfaces Openvpn <Vtunx> Tls Role <Role - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> tls role <role>
interfaces openvpn <vtunx> tls role <role>
Specifies the TLS role the endpoint will take.
Syntax
set interfaces openvpn vtunx tls role role
delete interfaces openvpn vtunx tls
show interfaces openvpn vtunx tls
Parameters vtunx
role
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify the TLS role the endpoint will take.
Use the set form of this command to specify the TLS role the endpoint will take.
Use the delete form of this command to remove the TLS role.
Use the show form of this command to view the configuration.
110
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
The TLS role that the endpoint will take. Supported values are as follows:
active: The endpoint takes the active role.
passive: The endpoint takes the passive role.
openvpn vtunx {
tls {
role role
}
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03