Interfaces Openvpn <Vtunx> Ipv6 Disable-Forwarding - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> ipv6 disable-forwarding
interfaces openvpn <vtunx> ipv6 disable-forwarding
Disables IPv6 packet forwarding on an OpenVPN interface.
Syntax
set interfaces openvpn vtunx ipv6 disable-forwarding
delete interfaces openvpn vtunx ipv6 disable-forwarding
show interfaces openvpn vtunx ipv6 disable-forwarding
Command Default IPv6 packets are forwarded.
Parameters vtunx
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to disable IPv6 packet forwarding on an OpenVPN interface.
You can also disable IPv6 forwarding globally, that is, for all interfaces, by using the system ipv6
disable-forwarding command.
Use the set form of this command to disable IPv6 packet forwarding on an interface.
Use the delete form of this command to enable IPv6 packet forwarding on an interface.
Use the show form of this command to view the configuration of IPv6 packet forwarding on an interface.
70
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
openvpn vtunx {
ipv6 {
disable-forwarding
}
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03