Show Security Firewall <Interface - Brocade Communications Systems 5600 vRouter Configuration Manual

show security firewall <interface>
Displays statistics for a firewall rule set of an interface.
Syntax
show security firewall
Command Default
When used with no option, the command shows information for all configured firewall rule sets.
Parameters
interface
A type of interface. For more information about the supported interface name formats, refer to
Types on page 101.
Modes
Operational mode
Usage Guidelines
Use this command to display statistics about configured firewall rule sets.
Examples
The following example shows how to display statistics for firewall rule sets. The output includes statistics for the configured
global state and configured firewall rule sets.
vyatta@R1# show security firewall
---------------------------------------
Rulesets Information: Firewall
---------------------------------------
--------------------------------------------------------------------------------
Firewall "fw_1":
Active on (dp0p192p1, in)
rule action
---- ------
1 allow
condition - stateful proto tcp flags S/FSRA all
8 allow
condition - stateful to { 20.20.20.0/24 }
---------------------------------------
Rulesets Information: Firewall
---------------------------------------
--------------------------------------------------------------------------------
Firewall "default_state_group":
Active on (dp0p192p1)
rule action
---- ------
100 allow
condition - stateful proto tcp all
200 allow
condition - stateful proto udp all
300 allow
condition - stateful proto icmp all
44
interface
proto packets
----- -------
tcp 0
any 0
proto packets
----- -------
tcp 0
udp 0
icmp 0
bytes
-----
0
0
bytes
-----
0
0
0
Global Firewall Commands
Supported Interface
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01