Interfaces Openvpn <Vtunx> Firewall <Action - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> firewall <action>
Applies a firewall rule set to an OpenVPN tunnel.
Syntax
set interfaces openvpn vtunx firewall { in | out } name
delete interfaces openvpn vtunx firewall [ { in | out } name ]
show interfaces openvpn vtunx firewall
Parameters vtunx
in
out
name
Modes
Configuration mode
Configuration
openvpn vtunx {
Statement
}
Usage Guidelines Use the set form of this command to apply a firewall rule set to an OpenVPN tunnel.
Use the delete form of this command to remove a firewall rule set from an OpenVPN tunnel.
Use the show form of this command to display the firewall rule set applied to an OpenVPN tunnel.
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
The firewall rule set is applied to inbound traffic.
The firewall rule set is applied to outbound traffic.
Rule set for forwarded packets on inbound interface.
firewall {
in name
}
interfaces openvpn <vtunx> firewall <action>
67