Interfaces Openvpn <Vtunx> Remote-Address <Ipv4 - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> remote-address <ipv4>
interfaces openvpn <vtunx> remote-address <ipv4>
Specifies the IP address for the tunnel interface of the remote end of the OpenVPN tunnel.
Syntax
set interfaces openvpn vtunx remote-address ipv4
delete interfaces openvpn vtunx remote-address
show interfaces openvpn vtunx remote-address
Parameters vtunx
ipv4
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify the tunnel IP address on the remote end of the OpenVPN tunnel. Only a
single address can be specified. This address is required for site-to-site mode OpenVPN tunnels but not
for client-server mode tunnels.
Use the set form of this command to specify the tunnel IP address on the remote end of the tunnel.
Use the delete form of this command to remove the tunnel IP address from the remote end of the
tunnel.
Use the show form of this command to view the tunnel IP address on the remote end of the tunnel.
82
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
Mandatory. The tunnel IP address on the remote end of the OpenVPN tunnel.
openvpn vtunx {
remote-address ipv4
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03