Interfaces Openvpn <Vtunx> Disable - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> disable
Disables an OpenVPN interface without discarding the configuration.
Syntax
set interfaces openvpn vtunx disable
delete interfaces openvpn vtunx disable
show interfaces openvpn vtunx
Command Default The OpenVPN interface configuration is enabled.
Parameters vtunx
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to disable an OpenVPN interface without discarding configuration. The interface can
then be re-enabled at a later time without the need to redefine the configuration.
Use the set form of this command to disable an interface.
Use the delete form of this command to enable an interface.
Use the show form of this command to view the configuration of an interface.
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
openvpn vtunx {
disable
}
interfaces openvpn <vtunx> disable
65