Reset Openvpn Interface <Vtunx> Client <Client-Name - Brocade Communications Systems 5600 Reference Manual

reset openvpn interface <vtunx> client <client-name>
Resets a client connection.
Syntax
reset openvpn interface vtunx client client-name
Parameters vtunx
client-name
Modes Operational mode
Usage Guidelines Use this command to reset the connection to a specific client. The connection to the client will be
disconnected and the server will wait for the client to re-establish the connection.
NOTE
The OpenVPN process does not get restarted by this command.
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
The "name" of the client. It corresponds to the "common name" contained in the
client's certificate. When a client initiates the VPN session, the server uses the
name in the certificate to look up and apply client-specific settings (if any). This
can be determined using the show openvpn server status command.
reset openvpn interface <vtunx> client <client-name>
113