Brocade Communications Systems 5600 Reference Manual page 38

OpenVPN Configuration
TABLE 16
Step
Enter configuration commands.
Commit the change.
Show the OpenVPN configuration.
No validation is done on this setting; therefore, when using it, you should make sure that the specified
OpenVPN options and their values (if any) are valid. Furthermore, because many OpenVPN options
conflict with one another, you should also ensure that the specified options do not conflict with one
another or with any other OpenVPN options that are configured through the Brocade vRouter
configuration. Finally, some OpenVPN options require coordination between the two endpoints (for
example, the value must be 0 on one side and 1 on the other), and you must ensure such constraints
are met.
38
Entering multiple OpenVPN options through multiple commands using openvpn-option
(Continued)
Command
...
vyatta@V1# commit
vyatta@V1# show interfaces openvpn vtun0
...
openvpn-option "--secret /config/auth/secret 1"
openvpn-option "--verb 5"
...
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03