Interfaces Openvpn <Vtunx> Remote-Host <Hostname - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> remote-host <hostname>
interfaces openvpn <vtunx> remote-host <hostname>
Specifies a remote IP address or hostname to which connections are made.
Syntax
set interfaces openvpn vtunx remote-host hostname
delete interfaces openvpn vtunx remote-host
show interfaces openvpn vtunx remote-host
Parameters vtunx
hostname
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify a remote IP address or hostname to which connections are made. This
address or hostname is required by a client to specify a server endpoint in a client-server mode tunnel.
It is also required by both sides in site-to-site mode.
Use the set form of this command to specify a remote IP address or hostname to which connections are
made.
Use the delete form of this command to remove a remote IP address or hostname to which connections
are made.
Use the show form of this command to view a remote IP address or hostname to which connections are
made.
88
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
A remote IP address or hostname to which connections are made.
openvpn vtunx {
remote-host hostname
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03