Interfaces Openvpn <Vtunx> Encryption <Algorithm - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> encryption <algorithm>
interfaces openvpn <vtunx> encryption <algorithm>
Specifies the encryption algorithm to be used within an OpenVPN tunnel.
Syntax
set interfaces openvpn vtunx encryption algorithm
delete interfaces openvpn vtunx encryption
show interfaces openvpn vtunx encryption
Command Default The encryption algorithm is the Blowfish algorithm with 128-bit key.
Parameters vtunx
algorithm
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify the encryption algorithm that is used within an OpenVPN tunnel.
Use the set form of this command to specify the encryption algorithm that is used within a tunnel.
Use the delete form of this command to remove the encryption algorithm that is used within a tunnel
and return to the default algorithm, which is the Blowfish algorithm with 128-bit key.
Use the show form of this command to view the encryption algorithm that is used within a tunnel.
66
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
The encryption algorithm that is used within the OpenVPN tunnel. The
algorithm is one of the following:
3des: DES algorithm with triple encryption
aes128: AES algorithm with 128-bit key
aes192: AES algorithm with 192-bit key
aes256: AES algorithm with 256-bit key
bf128: Blowfish algorithm with 128-bit key
bf256: Blowfish algorithm with 256-bit key
des: DES algorithm
The default algorithm is bf128.
openvpn vtunx {
encryption algorithm
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03