Interfaces Openvpn <Vtunx> Hash <Algorithm - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> hash <algorithm>
interfaces openvpn <vtunx> hash <algorithm>
Specifies the hash algorithm to be used within an OpenVPN tunnel.
Syntax
set interfaces openvpn vtunx hash algorithm
delete interfaces openvpn vtunx hash
show interfaces openvpn vtunx hash
Command Default The hash algorithm is SHA-1.
Parameters vtunx
algorithm
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines
Use this command to specify the hash algorithm that is used within an OpenVPN tunnel.
Use the set form of this command to specify the hash algorithm that is used within a tunnel.
Use the delete form of this command to remove the hash algorithm that is used within a tunnel and
return to the default algorithm, which is SHA-1.
Use the show form of this command to view the hash algorithm that is used within a tunnel.
68
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
The hash algorithm that is used within the OpenVPN tunnel. The algorithm is
one of the following:
md5: MD5 algorithm
sha1: SHA-1 algorithm
sha256: SHA-256 algorithm
sha512: SHA-512 algorithm
The default algorithm is sha1.
openvpn vtunx {
hash algorithm
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03