Interfaces Openvpn <Vtunx> Remote-Configuration Tunnel-Username <Username - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> remote-configuration tunnel-username <username>
interfaces openvpn <vtunx> remote-configuration tunnel-username
<username>
Specifies a username used to establish an OpenVPN tunnel with an OpenVPN server.
Syntax set interfaces openvpn vtunx remote-configuration tunnel-username username
delete interfaces openvpn vtunx remote-configuration tunnel-username
show interfaces openvpn vtunx remote-configuration tunnel-username
Parameters vtunx
username
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines
Use this command to specify a username used to establish an OpenVPN tunnel with an OpenVPN
server. The username is required only if the OpenVPN server has Autologin disabled and you are using
OpenVPN Access Server to provide information about OpenVPN tunnel configuration.
Use the set form of this command to specify a username.
Use the delete form of this command to remove a username.
Use the show form of this command to view a username.
86
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
A username to be used with a password for tunnel establishment to an
OpenVPN server.
openvpn vtunx {
remote-configuration {
tunnel-username username
}
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03