show openvpn server status
Displays information on connected clients in server mode.
Syntax
show openvpn server status
Modes
Operational mode
Usage Guidelines
Use this command to display information on all connected clients. This command is only available on a
server-mode endpoint. Also, note that the command output is not updated in real time. The time it was
last updated is displayed.
Examples
The following example shows the output of this command.
vyatta@vyatta:~$ show openvpn server status
OpenVPN server status on vtun0 (last updated on Wed Oct 29 22:34:18 2008)
Client
--------------- --------------- --------------- ------- ------- ----------------
vclient1
2008
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03
Remote IP
Tunnel IP
192.168.252.3
192.168.200.4
show openvpn server status
TX byte RX byte Connected Since
16.0K
16.5K
Wed Oct 29 21:59:50
119