Interfaces Openvpn <Vtunx> Server Client <Client-Name> Disable - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> server client <client-name> disable
Specifies a client that will be disallowed from connecting to the OpenVPN server.
Syntax
set interfaces openvpn vtunx server client client-name disable
delete interfaces openvpn vtunx server client client-name disable
show interfaces openvpn vtunx server client client-name
Command Default Clients are allowed to connect to the OpenVPN server.
Parameters vtunx
client-name
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify a client that will be disallowed from connecting to the OpenVPN server the
next time it tries to connect (and any subsequent attempts). This will not affect the client's current
connection. The current connection can be reset using the monitor interfaces openvpn vtunx traffic
command.
NOTE
If an OpenVPN client tries to connect to an OpenVPN server and is refused by the server, the client
process will exit.
Use the set form of this command to specify a client that will be disallowed from connecting to the
OpenVPN server on any subsequent attempts.
Use the delete form of this command to allow the client to connect to the OpenVPN server.
NOTE
An OpenVPN client needs to be restarted before it will initiate a new connection to the OpenVPN
server.
Use the show form of this command to view the configuration.
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
Mandatory. The "name" of the client. It corresponds to the "common name"
contained in the client's certificate.
openvpn vtunx {
server {
client client-name {
disable
}
}
}
interfaces openvpn <vtunx> server client <client-name> disable
93