Interfaces Openvpn <Vtunx> Local-Port <Port - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> local-port <port>
interfaces openvpn <vtunx> local-port <port>
Specifies a local UDP or TCP port on which incoming sessions are accepted.
Syntax
set interfaces openvpn vtunx local-port port
delete interfaces openvpn vtunx local-port
show interfaces openvpn vtunx local-port
Command Default The default port number is 1194.
Parameters vtunx
port
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify a local UDP or TCP port on which incoming sessions are accepted. This
port can be used as a server endpoint in a client-server mode tunnel or the TCP-passive endpoint when
TCP is used in site-to-site mode.
Use the set form of this command to specify a local port on which incoming sessions are accepted.
Use the delete form of this command to remove the local port on which incoming sessions are
accepted.
Use the show form of this command to view the local port on which incoming sessions are accepted.
78
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
The number of a port on which incoming sessions are accepted. The default
port number is 1194.
openvpn vtunx {
local-port port
}
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03