Interfaces Openvpn <Vtunx> Server Name-Server <Ipv4 - Brocade Communications Systems 5600 Reference Manual

interfaces openvpn <vtunx> server name-server <ipv4>
Specifies a name server address to be pushed to clients in a client-server environment.
Syntax
set interfaces openvpn vtunx server name-server ipv4
delete interfaces openvpn vtunx server name-server
show interfaces openvpn vtunx server name-server
Parameters vtunx
ipv4
Modes Configuration mode
Configuration
interfaces {
Statement
}
Usage Guidelines Use this command to specify an IPv4 address of a name server to be pushed to clients in an OpenVPN
client-server environment. This is supported by Windows clients. Other client types may not support
this.
Use the set form of this command to specify an IPv4 address of a name server to be pushed to clients.
Use the delete form of this command to remove the name server configuration.
Use the show form of this command to view the name server configuration.
Brocade 5600 vRouter OpenVPN Reference Guide
53-1003719-03
The identifier for the OpenVPN interface. This may be vtun0 to vtunx, where x
is a non-negative integer.
Multi-node. The IPv4 address of the name server to push to clients.
You can define multiple name server addresses to push to clients by creating
multiple name-server configuration nodes. Each must have a unique IPv4
address.
openvpn vtunx {
server {
name-server ipv4
}
}
interfaces openvpn <vtunx> server name-server <ipv4>
99