Using The Keypad - Motorola F4705A Quick Start Manual

Using the Keypad

The HC700-G keypad enables the user to enter both alpha-
betic and numeric data to the software application. However,
since the keypad can only contain a limited number of keys,
some special keys are assigned to perform special tasks that
are usually found on full-size computer keyboards. These are
produced using a combination of the existing keys on the
HC700-G keypad.
Two sets of keys exist on the HC700-G:
1. Keys active when in Alphabetic mode, which are those
seen on the overlay of the HC700-G keypad.
2. Keys active when in Shift or Function mode which are
those seen next to each key on the HC700-G keypad
panel.
Press the key to toggle between the Alphabetic and
<SHIFT>
Numeric keypad modes. Figure 9 shows the HC700-G keypad
and Table 3 describes the HC700-G keys assignment.
4-Way Navigation Key
Application Key
TAB/Send Key
Function Key
Main
Scan/Picture
Button
Backspace Key
Figure 9. HC700-G - Keypad
14
Enter Key
Escape Key
End Key
Shift key (yellow)
Space Key