Unlocking the MTM800 Enhanced
Your MTM800 Enhanced may be locked at power up.
To unlock the MTM800 Enhanced after powering on, enter the code
at the prompt. The MTM800 Enhanced enters the default Home
display.
The unlock code is originally set to 0000. Your Service Provider may
change this number before you receive your terminal.
Locking/Unlocking the Keypad
Press the Menu button and
Menu button and
The Emergency button is not locked. Pressing the Emergency
button unlocks the keypad.
When there is an incoming call and the keypad is locked, you can
still use the PTT, Rotary knob,
Radio User Identity (RUI)
Your MTM800 Enhanced needs to confirm RUI to provide the full
service. After powering on you are prompt to input your User ID and
User PIN.
To Log on press
To Log off press
If the Log on is not successful radio has limited access which is
specified by the Service Provider.
Radio with RUI feature disabled provides the full service to the
user.
to lock the keypad. Press again the
to unlock.
,
,
and
> More... > RUI > Log on
> More... > RUI > Log off
.
23