Setting functions
8.7 Application-specific functions
8.7
Application-specific functions
8.7.1
Functions that match the application
The inverter offers a series of functions that you can use depending on your particular
application:
● Unit changeover (Page 155)
● Braking functions
– Electrically braking the motor (Page 159)
– Motor holding brake (Page 163)
● Automatic restart
Details can be found in the List Manual from parameter p1210, see also: Manuals for
your converter (Page 292).
● Flying restart (ON command with rotating motor)
Details can be found in the List Manual from parameter p1200, see also: Manuals for
your converter (Page 292).
● PID technology controller (Page 167)
● Monitoring functions, e.g. Monitoring the load torque (system protection) (Page 171)
● Free function blocks (Page 176)
154
Converter with control units CU240D-2
Operating Instructions, 04/2014, FW V4.7, A5E34262100B AA