Parameters Missing From Profile Management Windows; Windows Wireless Network Connection Icon Shows Unavailable Connection (Windows Xp Only); Error Messages - Cisco CB21AG Installation And Configuration Manual

Error Messages

Step 4 Click Advanced Settings. Your network connections are listed in the Connections box on the Adapters
and Bindings tab.
Step 5 Use the arrows beside the Connections box to move the network connection that you want to use to the
top.
Step 6 Click OK.

Parameters Missing from Profile Management Windows

If some parameters are unavailable on the Profile Management windows, your system administrator may
have used an administrative tool to deactivate these parameters. In this case, these parameters cannot be
selected.
Windows Wireless Network Connection Icon Shows Unavailable Connection
(Windows XP Only)
If your computer is running Windows XP and you configured your client adapter using ADU, the
Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X
and show an unavailable connection even though a wireless connection exists. This is caused by a
conflict between the wireless network settings of ADU and Windows XP. Simply ignore the Windows
icon and use the ASTU icon to check the status of your client adapter's wireless connection.
Error Messages
This section provides a list of error messages that may appear during the installation, configuration, or
use of your client adapter. The messages are listed in alphabetical order within each section, and an
explanation as well as a recommended user action are provided for each message.
Error Message At least one wireless checkbox must be selected.
Error Message Authentication failed.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
10-12
Explanation You clicked OK or selected another Profile Management tab before selecting any
Wireless Mode options on the Profile Management (Advanced) window.
Recommended Action Choose at least one of the Wireless Mode options.
Explanation The domain logon failed for an unknown reason.
Try again to authenticate. If this message reappears, verify that all of the proper
Recommended Action
certificates have been loaded onto your computer and that your client adapter's current profile has
been configured properly. If the domain logon continues to fail, contact your system administrator.
Chapter 10 Troubleshooting
OL-4211-02