Table of Contents
Advertisement
Network Management
Figure 1-7
Ethernet port
1 TxD+
2 TxD–
3 RxD+
6 RxD–
Figure 1-8
shows the simplex SC connector (two required, one each for transmit and receive) used for PA-2FE-FX
optical-fiber connections. Cisco does not supply these multimode optical-fiber cables; they are available
from a commercial supplier.
Figure 1-8
Figure 1-9
Network Management
The PA-2FE port adapters support the following:
•
•
•
•
•
•
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
1-6
Crossover Cable Pinout—PA-2FE-TX RJ-45 Connections Between Hubs and Repeaters
DTE
1 TxD+
2 TxD–
3 RxD+
6 RxD–
shows the duplex SC connector (one required for both transmit and receive), and
PA-2FE-FX Duplex SC Connector
PA-2FE-FX Simplex SC Connector
SNMP agent v1 (RFC 1155–1157)
Ethernet MIB (RFC 1398)
IEEE 802.3 LAN specification for CSMA/CD
MIB for Network Management of TCP/IP-Based Internets: MIB-II (RFC 1213)
Definition of Managed Objects for Bridges (RFC 1493)
Evolution of Interfaces Group of MIB-II (RFC 1573)
Chapter 1
Overview
Figure 1-9
OL-3474-06
Advertisement
Table of Contents
