Show Platform Spanning-Tree - Cisco Catalyst 2960 Command Reference Manual

Appendix C Catalyst 2960 Switch Show Platform Commands

show platform spanning-tree

Use the show platform spanning-tree privileged EXEC command to display platform-dependent
spanning-tree information.
Syntax Description synchronization
[detail | vlan
vlan-id]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-8604-04
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |
include} expression]
Display spanning-tree state synchronization information. The keywords have
these meanings:
detail—(Optional) Display detailed spanning-tree information.
•
vlan vlan-id—(Optional) Display VLAN switch spanning-tree information
•
for the specified VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform spanning-tree
Catalyst 2960 Switch Command Reference
C-25