Curved Surface Support - High End Systems DML-1200 User Manual

Effect Mode Options Descriptions
5.2.4

Curved Surface Support

Effect Mode parameter DMX value = 135-149
Curved Surface Support corrects for shape distortions that occur when you project onto surfaces that aren't flat. This Global effect
facilitates projecting onto convex or concave cylinders, angular screens, spheres, and disk shaped surfaces.
You can apply this correction to any media server output including multi-fixture image panoramas created with the Collage
Generator Effect, (see
Use these adjustments in conjunction with Keystone parameters and Ratio parameters to refine the output shape on any of these
surfaces.
Effect Mode DMX Value
135
136
137
138
139
140
148
149
Modifier channels for Effect Mode 1 are labeled as CMY in the Wholehog system so you can also make use of the
color picker, HSI, and other Wholehog functions. Use the CMY parameter controls to adjust the three Effect Mode
1 Modifier parameters for both the Global and Graphic fixture types. The default for Effect Mode 1 is set to CMY1
as well. Modifier channels for Effect Modes 2 and 3 are labeled Mod 1, Mod 2, and Mod 3.
DML-1200 w/Axon Embedded Graphic Engine 24/12/2010 _____________________________________________________________________________ 76
Collage Generator™ Effect
on page 43.)
Curved Vertical Convex Cylinder (opening toward projector)
Curved Vertical Concave Cylinder (opening away from projector)
Vertical Inside Corner (opening toward projector)
Vertical Outside Corner (opening away from projector)
Sphere
Convex Disk (opening away from projector)
Curved Horizontal Convex Cylinder (opening toward projector)
Curved Horizontal Concave Cylinder (opening away from projector)
Surface
Object Effect Global Effect