Global Functions; Global Intensity; Global Effect Mode Channels - High End Systems DML-1200 User Manual

Global Functions

4. GLOBAL FUNCTIONS

4.1 Global Intensity

The Global Intensity parameter creates a smooth
individual objects. Use this parameter to adjust the intensity of a composite image over the separate Graphic Object's Opacity
parameter settings. Increase intensity from not visible at a DMX value of 0 to full intensity at a value of 255 (100%).
Default DMX Value: 0 = no intensity (video black)
The Dimmer, Object Opacity and Global Intensity parameters all have to be greater than 0 to make a defined
image visible
Graphic Object 1 Intensity DMX =255 (100%)
Graphic Object 2 Intensity DMX =255 (100%)

4.2 Global Effect Mode Channels

There are five banks of Global Effect Mode parameters, each with associated Modifier channels. All Global Effect Mode parameters
have an identical list of color and visual effect options. This lets you apply a multiple-effect combination to the composite image.
The table below describes the interaction between a Global Effect Mode parameter and the three associated Modifier parameters
for each option. You can find a detailed description of each option in
Modifier channels for Effect Mode 1 are labeled as CMY in the Wholehog system so you can also make use of the
color picker, HSI, and other Wholehog functions. Use the CMY parameter controls to adjust the three Effect Mode
1 Modifier parameters for both the Global and Graphic fixture types.
The default for Effect Mode 1 is set to CMY1 as well. Other Effect Mode Modifier channels are labeled Mod 1, Mod
2, and Mod 3.
DMX
Value
0
Safe (no effects selection)
1
CMY (RGB inverse)
2
CMY Add, All Pixels
3
CMY Add, All Non-black Pixels
4
RGB Add, All Pixels
5
RGB Add 2, All Pixels
6
RGB Add, All Non-black Pixels
7 RGB Swap to GBR
8 RGB Swap to BRG
9 Solarize 1 inverts a color if value < DMX value
10 Solarize 2 inverts a color if value > DMX value
11 Solarize 3 sets color to 0 if value is < DMX value
12 Solarize 4 sets color to 0 if value is > DMX value
______________________________________________________
37
fade to video black
Graphic Object 1 Intensity DMX =255 (100%)
Graphic Object 2 Intensity DMX =179 (70%)
Effect Mode Name/Description
that doesn't affect the opacity relationship between
Global Intensity DMX = 128 (50%)
Effect Mode Options Descriptions
Adjustments
Modifier 1 Modifier 2
NA
Cyan Magenta
Cyan Magenta
Cyan Magenta
Red Green
Red Green
Red Green
Red to Green Green to Blue
Red to Blue Green to Red
Red Green
Red Green
Red Green
Red Green
DML-1200 w/Axon Embedded Graphic Engine 24/12/2010
on page 49.
Modifier 3
NA NA
Yellow
Yellow
Yellow
Blue
Blue
Blue
Blue to Red
Blue to Green
Blue
Blue
Blue
Blue