High End Systems DML-1200 User Manual page 137

Parameter
Enhanced Collage Generator. Mod1 = grid style selec-tion, Mod2 = grid portion
displayed, Mod3 = edge blend.
Spherical Mapping. Outside. Mod1 = longitude angle, Mod2 = latitude angle,
Mod3 = center latitude.
Spherical Mapping. Inside. Mod1 = longitude angle, Mod2 = latitude angle,
Mod3 = center latitude.
Mattes. Mod1 = Mode, Mod2 = Matte Select, Mod3 = texture source
Enhanced Collage Wrap. Mod1 = array type, Mod2 = display cell, Mod3 = edge
blending
Segmented Collage Generator. Mod1 = array type, Mod2 = display cell,
Mod3 = edge blending
Segmented Collage Generator Wrap. Mod1 = array type, Mod2 = display cell,
Mod3 = edge blending
Output Correction, Horizontal Convex Cylinder. Mod1 = correction, Mod2 = adjusts
horizontal centerpoint, Mod3 = Not used
Global
Output Correction, Horizontal Concave Cylinder. Mod1 = correction,
Effect Mode Mod2 = adjusts horizontal centerpoint, Mod3 = Not used
1, 2, 3, 4 & 5
Collage Gen 3, improves blending. Otherwise, the same as global effect 141.
Mod1 = grid style selection, Mod2 = grid portion displayed, Mod3 = edge blend
Collage Gen 3 Wrap, improved blending. Otherwise, the same as global effect 145.
Mod1 = grid style selection, Mod2 = grid portion displayed, Mod3 = edge blend
Segmented Collage Gen 3, improves edge blending. Otherwise, the same as
global effect 146. Mod1 = grid style selection, Mod2 = grid portion displayed,
Mod3 = edge blend
Segmented Collage Gen 3 Wrap, improves edge blending. Otherwise, the same as
global effect 147. Mod1 = grid style selection, Mod2 = grid portion displayed,
Mod3 = edge blend.
Reserved. Defaults to effect 0
Special value used with global spherical mapping effect 142. Defaults to 0
otherwise.
Special value used with global spherical mapping effect 142. Defaults to 0
otherwise.
Pan and Scan. Mod1 = horizontal position, Mod2 = vertical position, Mod3 = Zoom 255
Global Effect These Modifier parameters adjust the option selected in the corresponding channel
of each of the five Global Effects Modes.The type of adjustment and the default
Modifier 1
value depends on the particular effect option.
Global Effect
NOTE: Setting the Graphic Effect Mode DMX = 253 or 254 activates specific
Modifier 2
spherical mapping control options for Modifier parameters. For more about Modifier
Global Effect
parameter functionality, see Global Effect Mode Channels on page 37, and specific
Modifier 3
effect options listed alphabetically in Effect Mode Options Descriptions on page 54.
Round iris closing from outside in
Round iris closing from inside out
Rectangle closing from outside in
Rectangle closing from inside out
Checkerboard, variation 1
Checkerboard, variation 2
Mask Select
Radial wipe, variation 1
Radial wipe, variation 2
Radial wipe, variation 3
Radial wipe, variation 4
Triangles, variation 1
Triangles, variation 2
Rectangular wrap
Tiles closing in
DML-1200 w/Axon Embedded Graphic Engine 24/12/2010 _____________________________________________________________________________ 129
Description
Global Mask
Static Masks
DMX Value Default
Dec. % Dec. %
141
142
143
144
145
146
147
148
149
na 0 0
150
151
152
153
154-252
253
254
0-255 0-100
0-255 0-100
NA NA
0-255 0-100
0 0
1
2
3
4
5
0 0
6
7 NA
8
9
10
11
12
13