Viewing Current Configuration Of All Servers; Configuring Columns - High End Systems DML-1200 User Manual

Content Management Application (CMA)

6.10.5 Viewing Current Configuration of All Servers

To view configuration information for all Servers on the network, select All Configurations in the left pane. The right pane now
displays configuration values for all the media servers on the fixture link in a sortable table. Click in the column heading to sort by
that column's values. A + symbol appears in the "sort by" column heading.
The example above contains the following information for one or all servers:
• The Fixture ID from 1-255
• The Fixture Name you have assigned
• The IP Address
• Model type [DML w/Axon, DL.2, DL.3, Axon]
• The DMX Start Channel currently assigned to each server
• The current Lamp Hours for each server (not shown with DML-1200 fixtures)

6.10.5.1 Configuring Columns

Select which columns are present by selecting Configure Columns from the Servers menu in the menu bar or by right clicking
anywhere in the main pane of the CMA.
Once you select Configure Columns, you can view a list of all possible columns. Choose which columns to view by either checking
or un-checking each selection. Once you have selected the columns you want to display, click on OK.
In DML-1200 fixtures/wAxon, hardware configuration items like projector options, pan/tilt, lamp hours,are set
using the projector toolset. Only configuration items related to the Axon media server will be displayed.
_____________________________________________________
119 DML-1200 w/Axon Embedded Graphic Engine 24/12/2010