Effect Mode Options Descriptions - High End Systems DML-1200 User Manual

Effect Mode Options Descriptions

5. EFFECT MODE OPTIONS DESCRIPTIONS
Effects can be applied to the Media File content (texture) mapped onto a 3-D object. Multiple Color and Geometric effects are
available in Effect Mode parameters for both individual Graphic object and Global control.
Most of the effect options you will find described in this chapter are available for Effects Mode parameters at both the graphic
control level for each Graphic Object and global control level for the composite image. The following pages describe all the Effect
Mode options available along with a description of how each Modifier parameter functions with that mode selected. Options are
arranged alphabetically and grouped as Color or Geometric Effects.
Check boxes in the upper right hand corner indicate whether this mode is available as a Graphic Object Effect, a Global Effect or
both.
Object Effect
Because the options for all Effect Mode parameters are identical, you can apply up to three effects at the graphic level and
another five effects at the global level. This lets you choose, for example, whether to apply a color effect to an individual object
or to the composite image at the global level.
After you select a mode using either a Graphic Object Effect Mode or a Global Effect Mode parameter, you can use the three
associated Modifier parameters to adjust the effect. The behavior of the Modifier parameters depends upon the selected effect.
• For general information on Graphics Control features, (see
• For a table of Graphic Object Effects, (see
• For a table of Global Effects, (see
Both Object and Global Effect parameters include effects for swapping colors to provide quick color conversions.
Use the following DMX Values in any of the Effect parameters to make these color conversions.
DMX Value
7
Red =>Blue
8
Red => Green
>
17
Red = Cyan
>
18
Red = Magenta
>
19
Red = Yellow
>
41 Red = Blue
>
42 Red = Red
>
43 Red = Green
DML-1200 w/Axon Embedded Graphic Engine 24/12/2010 _____________________________________________________________________________ 54
Global Effect
Effect Mode Parameters
Global Functions
Color Component Conversion Effect
>
Green = Red
>
Green = Blue
>
Green = Magenta
>
Green = Yellow
>
Green = Cyan
>
Green = Green
>
Green = Blue
>
Green = Red
Graphic Functions
on page 5 ).
on page 26).
on page 32).
>
Blue = Green
>
Blue = Red
>
Blue = Yellow
>
Blue = Cyan
>
Blue = Magenta
>
Blue = Red
>
Blue = Green
>
Blue = Blue