Table of Contents
Advertisement
Global Functions
4.4.3
Mask Edge Fade
The Mask Edge Fade parameter operates differently depending on the value of the Mask Select parameter.
Default DMX Value: 0 = no adjustment to mask
When the Mask Select parameter value = 0 to 127 (49%), Mask Edge Fade adjusts the amount of fading from a DMX value of 0 =
no edge fade to 255 (100%)= maximum edge fade.
When the Mask Select parameter value =128 (50%) to 255 (100%), the strobing masks are selected and Mask Edge Fade adjusts
the speed of the strobing from minimum at a DMX value = 0 to a maximum strobe speed at a DMX value = 255 (100%),
A Global Effect Mode parameter option lets you define a Mask Edge Fade color, (see page 56).
Original Image
4.5 Image Edge Fade
Four Image Edge Fade parameters let you control the Edge Fade for individual sides of
your object (top, bottom, left and right). When projecting abutting images, adjusting the
Edge Fade parameter lets you smooth the line between two images and also allows you
to change an object's boundary.
Default DMX Value: 0 = all edges are sharp and hard.
Adjust each side separately for edge fade from 0 = no fade to 255 (100%) = opaque.
100% Top Edge Fade
DML-1200 w/Axon Embedded Graphic Engine 24/12/2010 _____________________________________________________________________________ 44
Mask applied without Edge Fade
100% Left Edge Fade
Mask with Edge Fade applied
Original Content
100% Top, Bottom, Left, Right Edge Fade
Advertisement
Table of Contents
