Calling A Parameter - Roland RD-1000 Owner's Manual

c. Calling a Parameter
@ Make sure that the indicator of the Function
Button is lighted.
If it is not lighted, push the Function Button.
The Display shows the name and the value of the
parameter previously selected.
=
cit
EDIT FUNCTION
Make sure that the Function
indicator is lighted.
@) Call the parameter you wish to edit by rotating
the a Dial.
Parameter Value
Parameter Name
If you wish to return the Display to Bank/Voice
indication, simply push any Voice Selector Button
or the Bank Button ®.
d. Edit
@ Cali the parameter you wish to edit as
explained in "Calling a Parameter".
@ Push the Edit Button @.
The Edit indicator lights up showing that now the
RD-1000 is in the Edit mode.
se
Ea
q FUNCTION
Push the Edit Switch,
and the Edit Indicator
lights up.
@ Change the value of the parameter by rotaing
the a Dial.
13