Important Remark About Saving Your Settings; Selecting The Desired Parameter - Roland FR-3x Owner's Manual

FR -3 x V- Acco rd io n
Other settings
Important remark about saving
your settings
The FR-3x's in ternal memory remembers your setti ngs
while the FR -3x is swi tc hed on. While edi ting, there is
no abso lute nee d to save yo ur set tings.
Be aware, however, that all cha nges are lost when the
FR -3x is swi tched off. This incl ud es situations whe re the
FR -3x is swi tched off by the "Auto Power Off" function.
Remember t o save all settings as soo n as
YOLI
are
sure t hat you wa nt t o kee p th em.
Seleeting the desired parameter
1,
Press and hold the [SET] register to enter
PARAMETER made.
The display shows the na me of the last pa rameter
yo u selected.
2,
Use trebl e register [3] or [4] (PARAM LIST)
to se lect th e desired parameter.
(Here, we selected the "Orchestra Chord Leve!"
para meter.)
[NOTE]
Pressing registers [3) and [4) (PARAM LIST) silllultaneously
will select the first parameter, "AUd".
4-4-
3,
Use register [1] ( ..... VALUE) or [2]
(VALUE
~ )
to set th e desired valu e.
To re tu rn to th e last sett in g you saved for this
para meter, press regist ers [1] and [2J simultaneo usly.
4,
If you wa nt to use this change only tempo-
rarily, press the [SET] register to leave this
made.
Otherwise, proceed to save yo ur changes:
Saving
YOUf
chang es
1.
Press and hold th e [SET] register until th e
di spl ay looks as follows :
2.
Press regi ster [2] (VALUE
~ )
to save your
se ttings.
The display now looks as follows :
If you don 't wan t to save your changes, press [lJ
( .... VA LUE) The display briefly shows the "no" mes-
sage.
3.
Press regi ster [7] (ENTER) to confirm your
intenti on.
The settings are stored internally and the display
briefly shows the "y.E.S." message (the three do ts
flash]. then "don" when the settings are stored.
Next, the display ret urns to the master page.