Table of Contents
Advertisement
Panel Descriptions/ Making Connections
Top panel
5
6
1. VOLUME knob
This knob adjusts the volume of the entire D2.
2. Beat scan indicators
These indicators show the playback/recording location
within the measure of the pattern or song.
3. DISPLAY button
This switches the display. Each time you press the
button, the display will alternate between BPM, patch
number, information regarding the D-FIELD, and the
original screen (such as the pattern number display).
4. VALUE dial, ENTER/EXIT button
These are used to switch patterns or songs (p. 15, p. 69),
or to modify settings.
5. Part buttons
These are used to select whether each part will be heard
(p. 16), or to select the part whose settings you wish to
edit (p. 19).
6. REC FUNCTION buttons
When recording a pattern, these buttons are used to
make settings for the notes being input (p. 63).
10
1
2
3
7
7. D-FIELD
You can produce a variety of effects by touching this
area with your finger (p. 21).
8. WRITE button
Use this to save settings you have modified.
9. SYSTEM button
Use this when you wish to modify settings that affect the
entire D2 (p. 73).
10. Mode buttons
These buttons switch between Pattern mode (p. 15), Song
mode (p. 69), and MEGAMIX mode (p. 58).
11. Effect switches
These are on/off switches for Reverb (p. 42), Delay (p.
43), and Multi-effect (p. 44).
12. Sequencer section
These buttons are used to play back or record a pattern
or song (p. 15, p. 69).
4
8
9
10
11
12
Advertisement
Table of Contents
