General Specifications - Citizen CL-S400DT Technical Manual

1-1. General Specifications

Printing
Printing method
Resolution
Max. print width
Max. print length
Print density
Printing speed setting
Print mode
Batch mode
Tear off mode
1
Cut mode *
1
Peel mode *
Media
Types of media
Kinds of media
Recommended media
2
*
Max. media width
Min. media width
Min. label width
3
Min. label pitch *
Max. media thickness
Max. media length
Min. media length
Min. media thickness
Roll media diameter
*1: Options can be separately purchased.
*2: If you wish to use other media, please contact the shop where you bought this item.
*3: When a media pitch of less than 1 inch is used, activate the "Small Media Adjustment"
setting in the "Page Setup".
Direct thermal
Main scanning line density: 203 dots/inch (8 dots/mm)
Sub-scanning line density: 203 dots/inch (8 dots/mm)
Head 864 dots (effective dots: 832 dots)
104 mm
812.8 mm
Print density is adjustable with software
6, 5, 4, 3 or 2 inches per second.
2-4 inches per second with optional peeler.
Normal printing (single or multiple sheets)
Feeds back media to the tear-off position after printing is completed.
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are available.
• Backfeed
• Cut through
(Cut through refers to stopping present printing to cut the previously
printed label when it reaches the cut position. After cutting, printing
restarts but a gap may be created at the seam of the printing at this
time.)
Peels labels from the liners after printing them.
Roll, fanfold (continuous thermal media, thermal die-cuts, continuous
thermal tags, continuous thermal tickets)
Thermal-transfer media
Heat-transfer media: label media (150LA-1 Ricoh)
118.0 mm
19.5 mm
19.5 mm
6.35 mm
0.254 mm
812.8 mm
6.35 mm
0.0635 mm
Max. external diameter: 127mm
Media core: 25.4 to 76mm
Min. media core external diameter
(when using label media): 50.8mm
1-3
4.1 inch
32 inch
tag media (130LHB Ricoh)
4.65"
0.77"
0.77"
0.25"
0.01"
32"
0.25"
0.0025"
5"
1 to 3"
2"
Chapter 1 Specifications
1-1. General Specifications
CL-S400DT