Disassembly Of "Sa Mechanism Frame - Citizen CL-S400DT Technical Manual

3-6-7. Disassembly of "SA Mechanism Frame"

1. Remove the "SA Cover". Refer to
2. Remove the "Case" from the main body. Refer to
3. Disconnect the "SA Mechanism Frame" from the "SA2 Base Frame". Refer to
Disconnecting "SA Mechanism Frame" from "SA2 Base
4. Remove the "Cover Cable" to the left after releasing its 2 claws from the hooks.
5. Unhook one end of the "Spring Pop Up" with round nose pliers ().
6. Disengage the "E-Ring, 3" and pull out the "Shaft Hinge Frame" to the front.
* Now, the "SA Mechanism Frame" is disassembled three blocks ("SA2 Cover Frame", "SA
Guide Paper U" and "SA Guide Paper L & SA2 Main Frame").
SA2 Cover Frame
Cover Cable
Shaft Hinge Frame
Notes on reassembling:
• Insert the long end of the "Spring Pop Up" into the hole of the "SA2 Cover Frame" as shown in
the enlarged view.
• Securely hook the other end (shorter end) of the "Spring Pop Up" () on the concave portion of
the "SA2 Main Frame" as shown in the enlarged view.
"3-6-2 SA Cover and SA LCD
"3-6-3
E-Ring, 3
3-15
Chapter 3 Disassembly and Maintenance
3-6 Disassembly, Reassembly and Lubrication
PCB".
Case".
Frame"".
Spring Pop Up
1
SA Guide Paper U
SA Guide Paper L &
SA2 Main Frame
"3-6-4
CL-S400DT