Table of Contents
Advertisement
2 Main specifications of peeler
Width of liner (a)
Minimum length of label (b)
Maximum length of label
Minimum width of label (c)
Maximum width of label
Thickness of label
Thickness of liner
Inner diameter of roll media
Durability
Peeling position accuracy
: 25.4 – 118 mm (1 – 4.65 in)
: 25.4 mm (1 in)
Label: fine media/Thickness: 0.09 mm (0.0035 in)
(including glue layer)/Rolled inwards
: Approx. 120 mm (4.72 in)
However it will change depending on the
environment of the media exit and the type of
media used.
: Label must be positioned at 16 – 22 mm
(0.63 – 0.87 in) from left edge of liner, which is
viewed from front of media exit.
: To be narrower than liner
: 0.17 mm (0.0067 in) or less
: 0.07 mm (0.0027 in) or less
: 76 mm (3 in) or more
: 20 km (when using the label above)
: ±1.5 mm
Peeling position varies depending on the type of
media, the size of roll media and the size of ink
ribbon, so adjust it to the optimum condition as
needed.
a
c
Direction of media feed
I – 5
b
Advertisement
Table of Contents
