Citizen CL-S400DT Technical Manual page 42

[STOP] key:
Stops printing or cancels an error.
- When the [STOP] key is pressed during printing, the printer enters pause mode after
printing the current one label. In pause mode, if the [STOP] key is pressed for more than 4
seconds, 1 batch of printing job is cancelled.
The LCD displays "Job Clear" during cancel.
[MENU] key:
Enters menu setup mode or reissues the last label.
- When the [MENU] key is pressed in on-line ready status, the printer enters menu
configuration mode.
- By changing the printer configuration, you can reissue the last label by pressing the
[MENU] key.
To enable this function, set the "Menu Key Action" submenu under "After Print" main menu
to "Repeat Last One".
Once you have set to "Repeat Last One", pressing the [MENU] key reissues the last label.
However, in this case, to enter menu setup mode, you need to press and hold the [MENU]
key for more than 4 seconds.
2-29
Chapter 2 Operating Principles
2-3. Operation Panel
CL-S400DT