(4) How to operate submenus in Service mode
(4-1) Submenu table in Service mode
The following table shows the submenus of "Service Mode" main menu.
Submenu Name
Head Check
ROM Check
RAM Check
Motor Feed
Print Counter
Service Counter
Cut Counter
Value
Checks the number of defective thermal elements
and displays it. If no defective thermal element is
found, "0000" will be displayed.
Example: PASS
Performs ROM checksum test, and displays the
check result (OK or NG) and the checksum value.
Example: PROGRM
Performs RAM capacity check and displays the
check result.
Example: DRAM
Performs motor feed check.
Displays the total printed length since the printer is
firstly used.
Example: Length
Displays the service counter length in Km since you
reset it last.
Example: Length
To clear the service counter, press the [
key.
Displays the cut count since you reset it last.
Example: Count
To clear the cut counter, press the [
2-43
Chapter 2 Operating Principles
2-3. Operation Panel
Description
0000dots
OK 4F4E.
OK 16384KByte
1234.567Km
0123.456Km
123
STOP
] ( )
STOP
] ( ) key.
CL-S400DT