Operation Of Control Parts; Configuration Of Printer - Citizen CL-S400DT Technical Manual

Chapter 2 Operating Principles

2-2. Operation of Control Parts

2-2. Operation of Control Parts

2-2-1. Configuration of Printer

The following shows major configuration blocks.
(Option) Auto Cutter Unit
Cutter Motor
Cutter Position Sensor
(Option) Peeler Unit
Peel Sensor
Head Up Sensor
[SA Head Up SW]
Adjustable Sensor:
Transparent Sensor
[SA Adjust Sensor U]
Reflective Sensor
[SA Adjust Sensor L]
Thermal Head Temp. Sensor
[SA2 Head]
Motor Temp. Sensor
[SA Motor]
Operation Panel
(LCD/SWx4/LEDx2)
[SA LCD PCB]
SA2 Head
Unit, Motor
CL-S400DT
Cutter Motor Driver
Cutter Motor
Temp. Sensor
SA Main PCB
CPU
UPD703111BGJ-13-UEV-A
128MHz
Buzzer
FPGA
EP2C5F256C8N
Stepping Motor
Driver
(Option) I/F Board
(Standard type)
(Multi-function type)
2-12
AC Inlet & Power Switch
Flilter & Power Supply
[SA Power Supply]
RS232C
Driver/Receiver
Control / C.G.
F-ROM (64Mbits)
C.G (For CHN)
F-ROM (64Mbits)
S-DRAM (128Mbits)
IEEE1284
Ethernet I/F
Ethernet I/F
RS232C
USB 2.0
(Full speed)